This trigger wont work for every AK, the specs are just to lose. Also not using the correct trigger or the correct retainer plate provided will only increase the chances this wont work correctly.
parts list:
A FIME FCG is highly recommend as this is what this entire project is designed to be used with.
Alternatively you can use a ALG FCG with the ALG CAM, This should work with ALG EL and UL FCGs
Washers can be used to remove cam wobble
Firstly you need the trip bar, this trip bar should work with most AKs tho some fitting might need to be done. You might need to file the back side of the trip bar so that it fits with your bolt carrier group.
For the CAM you will need the FIME cam for FIME triggers or the ALG cam for ALG Triggers. If you are using a unsupported trigger then i recommend you try the FIME cam first.
You also need the retainer plate. This is NOT optional at this point as using other retainer plates will only add potential to cause issues
To make sure the FIME trigger is cut correctly use the jig
